Rancang Bangun Neopuff Berbasis Arduino Uno
Keywords:
Arduino UNO, Neonatal Asphyxia, Neopuff, PEEP Pressure, PIP PressureAbstract
Neonatal asphyxia is a critical emergency condition in newborns characterized by the failure to initiate or maintain spontaneous and regular breathing, leading to hypoxemia, hypercapnia, and acidosis. One of the primary interventions to manage this condition is positive pressure ventilation using a resuscitation device such as a T-piece resuscitator or Neopuff. The Neopuff device has advantages over manual methods because it can provide stable and controlled Peak Inspiratory Pressure (PIP) and Positive End-Expiratory Pressure (PEEP), thereby reducing the risk of lung injury in newborns. The results show that the Arduino-based Neopuff device is capable of producing PIP pressures between 15–25 cmH₂O and PEEP pressures between 4–6 cmH₂O, which are within the recommended clinical standards for neonatal resuscitation. The pressure sensor successfully detected real-time changes, and pressure adjustment could be performed precisely. Therefore, this device can serve as a simple, affordable, and effective alternative for neonatal resuscitation, with potential for further development through an automatic control system to enhance accuracy and safety
References
Ali, S., & Khan, R. (2021). Design and performance evaluation of a cost-effective neonatal resuscitator using microcontroller technology. International Journal of Biomedical Engineering and Technology, 37(4), 312–325. https://doi.org/10.1504/IJBET.2021.116789
Anderson, J. G., & Blenner, S. R. (2019). Innovations in neonatal care: Integrating low-cost technologies for resource-limited settings. Journal of Perinatal Medicine, 47(3), 276–284. https://doi.org/10.1515/jpm-2018-0310
Choudhury, A., et al. (2021). Design and implementation of a microcontroller-based non-invasive ventilation system. Biomedical Engineering Online, 20(1), 1–15.
Hussain, A., Kumar, S., & Singh, R. (2020). Microcontroller-based neonatal ventilator: Design and control system analysis. Biomedical Signal Processing and Control, 57, 101747. https://doi.org/10.1016/j.bspc.2019.101747
Kattwinkel, J., Perlman, J. M., Aziz, K., Colby, C., Fairchild, K., Gallagher, J., … Wyckoff, M. H. (2016). Neonatal resuscitation: 2015 American Heart Association guidelines update for cardiopulmonary resuscitation and emergency cardiovascular care. Pediatrics, 136(Suppl 2), S196–S218.
Kementerian Kesehatan Republik Indonesia. (2017). Pedoman pelayanan kesehatan bayi baru lahir. Jakarta: Kemenkes RI.
Kementerian Kesehatan Republik Indonesia. (2020). Petunjuk teknis pelaksanaan pelayanan kesehatan bayi baru lahir di fasilitas pelayanan kesehatan dasar. Jakarta: Direktorat Jenderal Kesehatan Masyarakat, Kemenkes RI.
Lindner, W., Högel, J., Pohlandt, F., Hummler, H., & Bührer, C. (2005). Sustained pressure-controlled inflation or intermittent mandatory ventilation in preterm infants after surfactant treatment: A randomized trial. The Lancet, 366(9484), 1427–1432.
Manuaba, I. B. G. (2012). Ilmu kebidanan, penyakit kandungan dan keluarga berencana untuk pendidikan bidan. Jakarta: EGC.
Maryunani, A. (2010). Asuhan neonatus, bayi, dan anak balita. Jakarta: Trans Info Media.
Pratama, D., & Sari, R. (2022). Rancang bangun alat resusitasi neonatus berbasis Arduino Uno. Jurnal Teknologi Kesehatan, 12(2), 55–63.
Rahman, M. M., et al. (2020). Development of a low-cost Arduino-based medical ventilator. Journal of Medical Engineering & Technology, 44(5), 235–243.
Singh, P., & Gupta, N. (2022). Smart neonatal monitoring and resuscitation system using IoT-based sensors. IEEE Access, 10, 78456–78466. https://doi.org/10.1109/ACCESS.2022.3186590
Tariq, F., & Alam, M. (2023). Development of an automated neonatal resuscitation device using Arduino and oxygen saturation sensors. International Journal of Advanced Computer Science and Applications, 14(1), 120–128. https://doi.org/10.14569/IJACSA.2023.0140114
World Health Organization. (2012). Basic newborn resuscitation: A practical guide. Geneva: World Health Organization.
