Rancang Bangun Kalibrator Autoclave Berbasis Iot (Internet Of Things) Dengan Penyimpanan Data

Diah Rahayu Ningtias; Arman Maulana Akbar; Bayu Wahyudi

Authors

Diah Rahayu Ningtias Sekolah Tinggi Ilmu Kesehatan Semarang
Arman Maulana Akbar Sekolah Tinggi Ilmu Kesehatan Semarang
Bayu Wahyudi Sekolah Tinggi Ilmu Kesehatan Semarang

Keywords:

Sterilization, Data logger, SD Card, ESP 32, Blynk IoT, DS18b20 waterproof sensor

Abstract

Sterilization is the eradication of materials, substances, or tools from various live microorganisms or their resting stages. Bacterial and fungal vegetative cells can be killed at a temperature of 60 °C within 5 to 10 minutes. A data logger is a tool used to monitor the temperature inside an autoclave. Previous research on "Autoclave Data Logger" aimed to assist in recording temperature activities within the autoclave. When the device is turned on, it automatically records the temperature inside the autoclave and stores the temperature data read on an SD card. After the sterilization process is completed, the SD card is retrieved for reading on a personal computer in Excel format or converted into a graph. Therefore, the author developed an IoT-based autoclave calibrator tool with data storage. This IoT-based autoclave calibrator tool with data storage utilizes the ESP32 microcontroller for programming and as a source in the IoT system. The ESP32 is used to control the input from the waterproof DS18b20 sensor, which functions to read or detect the temperature in the autoclave. The data read by the sensor will be displayed on the IoT platform, which is the Blynk IoT application, and after the results are displayed on the IoT platform, they will be stored on an SD card.

References

Adani, F., & Salsabil, S. (2019). Internet of Things: Sejarah Teknologi Dan Penerapannya. Isu Teknologi STT Mandala, 14(2), 92–99.

Artiyasa, M., Nita Rostini, A., Edwinanto, & Anggy Pradifta Junfithrana. (2021). Aplikasi Smart Home Node Mcu Iot Untuk Blynk. Jurnal Rekayasa Teknologi Nusa Putra, 7(1), 1–7. https://doi.org/10.52005/rekayasa.v7i1.59

Astuty, E., & Angkejaya, O. W. (2022). Pelatihan Sterilisasi Alat Dan Bahan Medis Pada Anggota Tim Bantuan Medis Vertebrae Fakultas Kedokteran Universitas Pattimura. Society: Jurnal Pengabdian Masyarakat, 1(5), 284–290. https://doi.org/10.55824/jpm.v1i5.137

Bayu, K., Fajrin, H. R., & Handoko, B. S. (2017). Data Logger Autoclave Berbasis Mikrokontroler Atmega 328. Repository UMY, 328, 1–5.

Farola, N. A. I., Gumiwang, H., & Sumber, S. (2021). Nine Channel Temperature Data Logger in Measuring the Effectiveness of the Sterilization Process of Medical Instruments with Dry Sterilization. International Journal of Advanced Health Science and Technology, 1(1), 26–33. https://doi.org/10.35882/ijahst.v1i1.5

Harir, R., Novianta, M. A., & Kristiyana, D. S. (2019). Jurnal Elektrikal, 6, 1–10. https://www.99.co/blog/indonesia/harga-pompa-air-mini/

Hernawati, K. (2012). Internet Virtual Storage sebagai Alternatif Penyimpanan Data. PYTHAGORAS Jurnal Pendidikan Matematika, 2(2), 1–10. https://doi.org/10.21831/pg.v2i2.534

Jiwatami, A. M. A. (2022). Aplikasi Termokopel untuk Pengukuran Suhu Autoklaf. Lontar Physics Today, 1(1), 38–44. https://doi.org/10.26877/lpt.v1i1.10695

Lysbetti Marpaung, N., & Ervianto, D. E. (2012). Data Logger Sensor Suhu Berbasis Mikrokontroler ATmega 8535 dengan PC sebagai Tampilan. Jurnal Ilmiah Elite Elektro, 3(1), 37–42.

Maheswara, M. F., Purwiyanti, S., Nasrullah, E., Lampung, U., & Meneng, G. (2023). Rancang Bangun Alat Monitoring Suhu Menggunakan Sensor Ds18B20 Dan Pengaduk. Jurnal Ilmiah Teknik Elektro dan Komputer (JITET), 11(3), 513–519.

Nugraha, A., Priyulida, F., & Putra, E. (2022). Perancangan Autoclave Berbasis Sistem Monitoring. Jurnal Teknologi Kesehatan Dan Ilmu Sosial (Tekesnos), 4(1), 239–247. http://e-journal.sari-mutiara.ac.id/index.php/tekesnos/article/view/3193

Pulungan, A. B., & Goci, D. S. (2021). Penggunaan Sistem Data logger Dalam Pencatatan Data Parameter Panel Surya berbasis Mikrokont