Sistem Kontrol Suhu Infant Warmer Menggunakan Metode PID (Proportional, Integral, Derivative)
Keywords:
Infant Warmer, Incubator Analyzer, PIDAbstract
The common issue faced by newborn babies is their difficulty in regulating body temperature with their environment. This often leads to hypothermia, which is a significant cause of mortality in newborns. Therefore, biomedical equipment that can regulate temperature in the newborn environment is crucial. In the design and development research of an Infant Warmer Temperature Control System using the PID method, key components include the Atmega328P microcontroller, a Skin Sensor for monitoring baby body temperature, and an SSR driver circuit for heater control. The PID control method utilizes feedback mechanisms to correct errors between measured values and their deviations.To ascertain accuracy, functional testing was conducted using an Incubator Analyzer. The comparison between the skin sensor and the Incubator Analyzer showed minimal differences, with the largest difference being 0.15℃ and the smallest 0.01℃. It can be concluded that the skin sensor readings are accurate within tolerance limits. The maximum error percentage of the device was 0.2%, while the minimum error percentage was 0%. Based on these findings, it is concluded that the PID method Infant Warmer temperature control system designed functions effectively, manages overshoot well, and maintains stability.
References
Ahla, Z. Y., & Musafa, A. (2019). Pengendalian suhu dengan metode PID pada alat penetas telur. Maestro, 2(2), 493–501.
Ali, M. (2004). Pembelajaran perancangan sistem kontrol PID dengan software Matlab. Jurnal Edukasi Elektro, 1(1), 1–8.
Ardiyanto, A., Arman, & Supriyadi, E. (2021). Alat pengukur suhu berbasis Arduino menggunakan sensor inframerah dan alarm pendeteksi suhu tubuh di atas normal. Sinusoida, 23(1), 11–21.
Atmega, M., Ulina, S., Primasyukra, M. A., & Tarigan, K. (2023). Sosialisasi pengujian alat infant warmer berbasis. Jurnal [nama jurnal tidak lengkap], 2(3), 111–114.
Muharom, S., Masfufiah, I., Firmansyah, R. A., Hamid, A., & Oetomo, S. (2021). Implementasi kontrol suhu menggunakan metode PID pada aplikasi inkubator infant warmers. Cyclotron, 4(1), 55–59.
Nurcahya, B., Widhiada, I. W., & Subagia, I. G. A. (2016). Sistem kontrol kestabilan suhu pada inkubator bayi berbasis Arduino UNO dengan MATLAB / SIMULINK. Jurnal METTEK, 2(1), 35–42.
Ramdani, D. R., Nugroho, A. K., & Destyningtias, B. (2019). Pengaturan suhu untuk mengatasi bayi terbakar berbasis Arduino dan LabVIEW pada infant incubator. Elektrika, 11(1), 21. https://doi.org/10.26623/elektrika.v11i1.1540
